9900 KEYSTON JACK CONNECTOR

9900 Series
FEATURES:
* Keyston Jacks feature non-PC board design.
* Exceeds requirements in TIA/EA 568 test procedures.
* Twists are maintained to within 1/2″(12.7mm) per
category 5e installation requirements.
* Available in 7 standard Keyston opening.
or to complement any decoration.
* Work in standard Keyston opening.
* Small high-density configuration, so you can mount
more alloys jacks in plates
* copper contacts for superior connectivity
* IDC contact design eliminates need to strip individual
conductors.
* Insulation displacement contact (IDC) ensure highest
quality, highest reliability termination available.
PHYSICAL SPECIFICATIONS:
* Apply UL94-V0 high-impact, five-retardant pc material.
* Copper contacts 50μ” gold-plated pins over 100μ” nickel layer.
* Insulation life cycle: 1000 cycles (min) /I.D.C. 250 cycles (min).
* Plug & jack contact force: 100g.
* Take IDC: 22~26 AWG wires.
* Plug retentive force: 30 lb (min).
* Include dust 68 , UL certified.
ELECTRICAL SPECIFICATIONS:
* Current vating: 1.5 AMPS
* Dielectric withstand Voltage:
   1,000 VAC RMS. @60HZ/1min
* Temperature range: -40°C ~ +105°C
* Contact resistance: 20MΩ
* Insulation resistance: 500MΩ
* DC resistance: max 0.1Ω

View Product Spec Sheet